Horizontal Lineal Wrapper 816FA-D5

Wrappers » Horizontal Lineal Wrappers » Horizontal Lineal Wrapper 816FA-D5

Kalamazoo Packaging Systems designed and built this dual film head high speed wrapper with a output staging conveyor. The unit is used for wrapping epoxy tubes for the mining industry. Click on the Tabs below for complete specifications on this unit. Call or E-mail us for further information. All KPS Horizontal Winders are fully guarded with expanded metal.

Horizontal Winder:

  • 1 hp. 230v AC TENV motor with a right angle gear reducer
  • Solid state variable speed controller
  • 0-50 RPM, friction wheel drive
  • Floor to center of ring 34″
  • Floor to center of ring 34″

Film Applicator

  • Dual 5″ Kalamazoo Variable Tension Film Delivery

Power Requirements

  • 480/3/60 Hz. 20 AMP

Air Requirements

  • 80 P.S.I.

Description: 816FA A fully-automatic horizontal winder to wrap products with a maximum width of 6″ and a minimum of 16″ in length. The winder will automatically start the film, wrap the product with stretch film for a predetermined amount of wraps, and cut the film. Wrap Cycle: Place the product tote onto the air powered lift. The air powered lift will dump the product out of the tote and onto the input roller conveyor. After straightening the product, push the Cycle Start button.The input conveyor will come on and convey the product into the Winder. The Winder ring will start applying the film to the front edge of the product and the conveyors will come on and convey the product through the Winder.The conveyors will stop and the Winder will apply the film to the tail end of the product. The winder will automatically cut the film as the output conveyors come back on to convey the product out of the Winder and onto the second output roller. The air powered pushers will push the product onto the output belt conveyor. End of cycle.

  • Dual 5″ Kalamazoo variable tension film delivery
  • All KPS Horizontal Winder are fully guarded with expanded metal

  • Fully-Automatic Horizontal Winder
  • Dual 5” film delivery with two film holder and cutters on the side.
  • System upset so casters and floor locks can be added
  • Special input 7”wide x 96”long powered roller conveyor with moveable bead rollers on each side.
  • The input side to have and air powered tote lifter, manually moveable product stop, and a plastic push block.
  • Special output 7”wide x 26-1/2”long powered roller conveyor with moveable bead rollers on each side.
  • Special second output 10”wide x 64”long powered roller conveyor with air powered product pushers.
  • Accumulation powered belt conveyor 60”wide x 50” long.
  • Power Requirements – 480/3/60 10 A.
  • A-B Micrologix PLC
  • Reliance AC Drives

Get a Free Quote

  • Please note: The more information you can provide (dimensions of load, weight, etc.) will be helpful in determining the best unit to fit your needs.
  • This field is for validation purposes and should be left unchanged.