Horizontal Lineal Wrapper 820FA20A-AHD

Wrappers » Horizontal Lineal Wrappers » Horizontal Lineal Wrapper 820FA20A-AHD

820FA 20A AHD: A fully-automatic horizontal winder to wrap products with a maximum width of 21” and a minimum of 36 ” in length. The Winder will automatically start the film, wrap the product with stretch film for a predetermine amount of wraps and cut the film. 20” Kalamazoo variable tension film delivery. All KPS Horizontal Winder are fully guarded with expanded metal.

Horizontal Winder:

  • 1 hp. 230 v AC TENV motor with a right angle gear reducer.
  • Solid state variable speed controller
  • 0-80 RPM, friction wheel drive
  • Floor to center of ring 39.25”

Film Applicator:

  • 20 ” Kalamazoo Variable Tension Film Delivery

Power Requirements:

  • 230/3/60 hz. 40 AMP

Air Requirements:

  • 80 PSI

820FA 20A AHD Wrap Cycle: Place the product onto the input conveyor and push the Cycle Start button. Or, if the system is going to be put inline with other conveyors a sensor will automatically turn on the input conveyor. The input conveyor will come on and convey the product into the Winder. The Winder ring will start applying the film to the front edge of the product as the conveyors turn on to convey the product though the Winder. The conveyors will stop and the Winder will apply the film to the tail end of the product. The Winder will automatically cut the film and the output conveyor will come back on and convey the product out of the Winder. End of cycle. Features:

  • Mitsubishi PLC
  • Banner sensors
  • Fully guarded
  • Kalamazoo variable tension 20 ” film delivery
  • Automatic film starting and cutting
  • Automatic shut down when film door is open
  • Automatic Air Powered Hold-down rollers
  • Direct fraction drive
  • Computer designed for smooth running and easy maintenance

Model 820FA-20 Fully-Automatic Horizontal Winder with:

  • Air powered Product Hold Downs
  • Electric air conditioner
  • 1ea. 5” Input Gravity Roller Conveyor w/ Poly Covers
  • 1ea. 10’ Input Gravity Roller Conveyor w/ Poly Covers
  • 1ea. 820PB72: 21 ” wide x 72 ” long Input Powered Belt Conveyor
  • 1ea. 820PB: 21 ” wide x 72 ” long Output Powered Belt Conveyor
  • 1ea. 10’ output Gravity Roller Conveyor
  • 1ea. 5” Output Gravity Roller Conveyor
  • System integration and one day of testing, tuning, and training at customers’ facility

Options:

  • Single non-adjustable product fork
  • Manual adjustable product forks
  • Powered adjustable product forks
  • Manually adjustable input side rollers
  • Air powered input side rollers
  • Total lock swivel caster for conveyors
  • Caster and floor lock for winder with powered conveyor

Get a Free Quote

  • Please note: The more information you can provide (dimensions of load, weight, etc.) will be helpful in determining the best unit to fit your needs.
  • This field is for validation purposes and should be left unchanged.