Manual Turntable Pallet Wrapper for Cold Room Areas 4000M-PMC

Wrappers » Pallet Wrappers » Turntable Pallet Wrappers » 4000 Lb Turntable Pallet Wrappers » Manual Turntable Pallet Wrapper for Cold Room Areas 4000M-PMC
This is a powered manual pallet wrapper. Everything is powered, but the user controls the operation of the machine. System comes with heated control cabinet and light weight synthetic gear oil in the Turntable and Film Lift reducers. It is designed to be placed in a cold room or a freezer.

Turntable capacity: 4000 lbs
Turntable speed: 0-12 rpm
Turntable height: 4 3/4″
Turntable size: 48″ dia
Turntable drive: 1/2 HP; chain
Film carriage drive: 1/2 HP; belt
Space requirements: 48.5″x96″
Optional ramp: 40″ Wide X 50″ Long
Maximum diagonal pallet size: 75″
Maximum wrap height: 84″
Film web: 20″
Air Rrequirements: 80PSI @ 80CFM
Shipping Weight: 950 lbs.
Cabinet Heater
Lightweight Gear Oil

To Operate the Powered Manual: Attach the film. Turn the turntable selector switch to ON. After the reinforcing wraps are applied, turn the film carriage selector switch to RAISE. When the film reaches the top of the load, return the film carriage switch to OFF, place the reinforcing wraps on the top of the load and turn the film carriage selector switch to LOWER. After the cycle is complete return the two switches to the OFF position.

  • Tough urethane enamel paint. (Light Grey)
  • Will accommodate loads up to 4,000 lbs.
  • Faster and easier than wrapping by hand.
  • 4000M-PM Powered Manual Spiral accommodates varying load heights.
  • 1/2 hp. Variable speed AC turntable drive motor with variable AC controller
  • 1/4 hp. Variable speed AC film carriage lift motor with variable AC controller
  • Adjustable top and bottom limit switches
  • 20″ Kalamazoo Constant Prestretch Film Delivery
  • Machine designed so it can be shipped with a built in scale or the scale can be added later.
  • 48″ diameter nonskid floor plate disc. (Other sizes available)
  • Can be loaded by fork lift or pallet jack. (when used with optional ramp.)
  • Fork lift portability from both ends allows for easy placement throughout any facility
  • Most replacement parts can be obtained through any WW Grainger, locations nationwide.
  • Limited lifetime warranty on all K.P.S. manufactured components.

  • 30” Constant Prestretch Film Delivery
  • 20” Variable Tension Film Delivery
  • 30” Variable Tension Film Delivery
  • 20” Powered Prestretcher Film Delivery
  • 30” Powered Prestretcher Film Delivery
  • NEMA 12 dust/oil tight enclosures
  • Allen Bradley Flex4 Drives
  • Ramp
  • Ramp for scale equipped machines
  • Ramp for Powered Walkie 84” long
  • Extra Length (for larger loads)
  • Extra Height ( 110 ” tall loads) with Detachably tower for shipping by common carrier
  • 4,000 lbs. Built In Scale
  • Printer w/ 2”x 4” labels 140 per roll. ( 1 case 10 rolls)
  • 60” x 3/8” FL. PL. Turntable Disc
  • 72” x 3/8” FL. PL. Turntable Disc
  • 72” x 3/8” FL. PL. Turntable Disc with Scale
  • 84”x 3/8” FL. PL. Turntable Disc
  • 84”x 3/8” FL. PL. Turntable Disc with Scale
  • Power Requirements 200-240/3/50-60hz. 10AMP.
  • Epoxy paint, Custom color

Get a Free Quote

  • Please note: The more information you can provide (dimensions of load, weight, etc.) will be helpful in determining the best unit to fit your needs.
  • This field is for validation purposes and should be left unchanged.