Turntable Pallet Wrapper 4000-PM Powered Manual

Wrappers » Pallet Wrappers » Turntable Pallet Wrappers » 4000 Lb Turntable Pallet Wrappers » Turntable Pallet Wrapper 4000-PM Powered Manual

The Kalamazoo 4000-PM Stretch Wrapper is Manually operated by selector switches. System comes with variable speed AC motors and Drives. Available options: Built-in Industrial Scale, Printers, Extra Height, Extra Length, Larger Turntable Disc, more Capacity, 20″ and 30″ Constant Pre-Stretch, Variable Tension, and Powered Pre-Stretch, and Ramps

**Note: The 4000-PM manuals have changed through the years, you may need to contact Kalamazoo for your Manual. The Serial number of your system will be needed.**

Turntable capacity: 4000 lbs
Turntable speed: 0-12 RPM
Turntable height: Standard 4 3/4″ with Scale 4 7/8″
Turntable size: 48″ dia.
Turntable drive: 1/2 hp. AC Motor, Chain Driven with AC Drive
Film carriage drive: 1/2 hp. AC Motor, Belt Driven with AC Drive
Space requirements: 48 1/2″ Wide x 94″ Length
Maximum pallet size: 53″ x 53″ , Maximum Diagonal 75″
Maximum Wrap Height: 84″
Film web: 20″
Power requirements: 115/1/60 15A
Shipping Weight: 950 lbs.

To Operate the Powered Manual:

Attach the film. Turn the turntable selector switch to ON. After the reinforcing wraps are applied, turn the film carriage selector switch to RAISE. When the film reaches the top of the load, return the film carriage switch to OFF, place the reinforcing wraps on the top of the load and turn the film carriage selector switch to LOWER. After the cycle is complete return the two switches to the OFF position.

  • Telemecanique AC Drive Controllers
  • System Color (Light Gray)
  • Selector Switches Operate System. Turntable Off.On and Film Carriage Raise/Off/Lower
  • Will accommodate loads up to 4,000 lbs.
  • 4000M-PM Powered Manual Spiral accommodates varying load heights.
  • 1/2 hp. Variable speed AC turntable drive motor with solid state AC controller
  • 1/4 hp. Variable speed AC film carriage lift motor with solid state AC controller
  • Adjustable top and bottom limit switches
  • 20″ Kalamazoo Constant Prestretch Film Delivery
  • 48″ diameter nonskid floor plate disc. (Other sizes available)
  • Can be loaded by fork lift or pallet jack. (when used with optional ramp.)
  • Fork lift portability from both ends allows for easy placement throughout any facility

Limited lifetime warranty on all K.P.S. manufactured components

  • 30” Constant Pre-Stretch Film Delivery
  • 20” Variable Tension Film Delivery
  • 30” Variable Tension Film Delivery
  • 20” Powered Pre-Stretch Film Delivery
  • 30” Powered Pre-Stretch Film Delivery
  • NEMA 12 dust/oil tight enclosures
  • Allen Bradley Flex4 Drives
  • Ramp
  • Ramp for scale equipped machines
  • Ramp for Powered Walkie 84” long
  • Extra Length (for larger loads)
  • Extra Height (110″ Tall Loads) with Non-detachable Tower
  • Extra Height (110” Tall Loads) with Detachable tower for shipping by common carrier and crating
  • Larger Diameter Turntable Disc
  • Built In Scale
  • Printer w/ 2”x 4” labels 140 per roll. ( 1 case 10 rolls)
  • Cold Room and /or Freezer. Light gear oil in the reducers and thermostat controlled heater in cabinet
  • Power Requirements 200-240/3/50-60hz. 10AMP.
  • Crating for oversea shipments
  • Epoxy paint, Custom color
  • System complies with safety category 1. Category 2,3, and 4
  • Safety Fence, Rail, Light Curtains, and Extra Guarding
  • UL, CE, and NTEP Certified Systems

Get a Free Quote

  • Please note: The more information you can provide (dimensions of load, weight, etc.) will be helpful in determining the best unit to fit your needs.
  • This field is for validation purposes and should be left unchanged.