Turntable Pallet Wrapper 6060HPM Powered Manual

Wrappers » Pallet Wrappers » Turntable Pallet Wrappers » 4000 Lb Turntable Pallet Wrappers » Turntable Pallet Wrapper 6060HPM Powered Manual

This Powered Manual Turntable Wrapper features a 6,000 lb. capability. It has a high profile variable speed turntable motor with soft-start. 15″ Dia. And 60″ octagonal disk. Manual Film Carriage and Turntable are variable speed and completely controlled by the operator. The unit shown is a Semi-Automatic Unit. Please click on the tabs below for more information on this unit.

Specification Value
Turntable Capacity 6000 lbs
Turntable Speed 6 RPM
Turntable Height 14-1/4”
Turntable Height with Scale 14-1/2”
Turntable Disc Size 60-1/2” Octagonal Disc, 5” Skirt
Turntable Drive 3/4 HP; Direct friction drive
Film Carriage Drive 1/2HP; Belt
Space Requirements 60-1/2” Wide x 108” Long
Maximum Diagonal Pallet Size 86”
Maximum Wrap Height 82”
Film Web 20”
Power Requirements 230/1-3/60hz. 20 AMP.
Shipping Weight 1400 lbs

Process: Attach the film. Turn the turntable selector switch to ON. After the reinforcing wraps are applied turn the film carriage selector switch to RAISE. When the film reaches the top of the load return the film carriage switch to OFF, place the reinforcing wraps on the top of the load and turn the film carriage selector switch to LOWER. After the cycle is complete return the two switches to the OFF position. Features

  • Tough urethane enamel paint. (Light Gray)
  • Turntable Off/On. Film carriage Raise/Off/Lower
  • Will accommodate loads up to 6,000 lbs.
  • 3/4 hp. Variable speed AC turntable drive motor with solid state AC controller
  • 1/2 hp. Variable speed AC film carriage drive motor with solid state AC controller
  • Adjustable top and bottom limit switches
  • 8”x 3” Swivel caster with tapered roller bearing, extra wheel under the disc for antitip
  • Faster and easier then wrapping by hand.
  • 6060H-MPM Powered Manual will accommodates varying load height.
  • 20” Kalamazoo constant prestretch film delivery.
  • 60-1/2” Octagonal nonskid floor plate disc.
  • Optional built in scale.
  • Fork lift portability for easy placement throughout any facility.
  • Most replacement parts can be obtained through any W.W. Grainger, Locations Nationwide.
  • Limited lifetime warranty on all KPS Manufactured components.

  • 30” Constant prestretch film delivery
  • 20” Variable tension film delivery
  • 30” Variable tension film delivery
  • 20” Powered prestretch film delivery
  • 30” Powered prestretch film delivery
  • Allen-Bradley Drives
  • Extra height for 110” loads
  • Extra length for larger loads
  • 6,000 lb. built in scale
  • Printer with 2″ x 4″ labels 140 per roll (1 case 10 rolls)
  • NEMA 12 dust/oil tight enclosure
  • Top platen load stabilizer
  • Epoxy paint or Custom color
  • Power requirements 480/3/60hz. 12 amp.

Get a Free Quote

  • Please note: The more information you can provide (dimensions of load, weight, etc.) will be helpful in determining the best unit to fit your needs.
  • This field is for validation purposes and should be left unchanged.